Cookie Consent

We use cookies to make our site work and improve your experience. By continuing, you agree to our use of essential cookies. See our Privacy Policy for details.

Published dateNovember 19, 2026
Standards & Knowledge3 min read

Testing your home for radon: What you need to know

Article image

Radon is the leading cause of lung cancer in BC after smoking and is present in one in five Canadian homes. Since radon is odourless and invisible, testing is the only way to determine levels in your home. Here’s how to test for this potentially dangerous gas.

Choosing your kit

There are two types of radon testing devices. The first type is the electronic monitor, which provides real-time data and tracks changes in levels over weeks, months, and years. The quality of results may gradually decline, so replace it after five years if it can’t be recalibrated to company specifications.

The second type is the single-use detector. Unlike electronic monitors, it works without power and is sent to a lab for results after testing. Radon levels often fluctuate due to weather, ventilation, and activities in your home. To get reliable results, buy one that tests for at least three months.

Whichever type you choose, ensure it is certified by checking this National Radon Proficiency Program (NRPP) list. Find approved testing devices through BC Lung Foundation’s virtual store, or buy one at major retailers like Canadian Tire or Home Depot.

Where to install it

Both types of devices should go in the same places. For optimal measurements, install yours in a regularly used area – including a family room, bedroom or playroom – on the lowest level of your home. Leave it at breathing level, typically 0.5 to two metres above the floor, on a flat surface or suspended from a wall or ceiling.

Avoid placing them near electronics, appliances, heat sources like fireplaces or direct sunlight, and openings like windows, doors and vents. Also avoid placing them in kitchens, bathrooms, laundry rooms, closets, and unfinished basements.

Completing tests

Always follow the instruction manuals. During testing, don’t move devices as this could impact the results.

A single-use detector requires a few more steps. When testing begins, record its location, jot down the date and time, and store the instructions and return envelope in a safe place. Right after testing, record the end date and time, then return the detector in the envelope. Once the lab receives it, expect your results in three to six weeks.

For more details on testing, read this federal government brochure.

Taking action and disclosing high levels

Health Canada recommends keeping radon levels below 200 Bq/m³. If yours are higher, hire a certified radon mitigation professional to reduce levels in your home. Find one in your area using NRPP's search tool.

If sellers test their homes before listing, they should disclose the results to potential buyers and their REALTOR®. If a REALTOR® learns that a property has radon levels above 200 Bq/m³, they must disclose this information to clients and customers.

The more REALTORS® know about radon, the better equipped they are to answer client questions, support informed decisions, and help keep buyers and sellers safe.

More information

If you haven't yet, read our article on understanding the dangers of radon. For everything you need to know, visit radonkill.ca/bc.